Details:

l  Before there was a tire tag, recording the tire number was manually transcribed.Because the tire number is only a shallow indentation on the black tire, the data copying will be wrong.In order to solve this problem, the tire manufacturers put forward the idea on the label. However, due to the special environment conditions of the tire when curing, the common label could not adapt to the environment when curing at high temperature, so the vulcanization label came into being.

l  What is a tire sulphur label

l  Tire vulcanization label is designed for the tire vulcanization process, curing temperature can reach 200 ℃, short curing temperature is even higher.After vulcanization label and tire synchronous sulfide, vulcanization of barcode on the label and tire one, will never fall off, can accompany the the entire life cycle of the tire, sulfide in front of the label paper and substrate are mainly polyester material, back glue is versatile insoluble sticky rubber emulsion, can provide good viscosity in the tire vulcanization process, so that when the vulcanization label and tyre adhesive, deformation, discoloration, and waterproof, acid and alkali resistance, salt tolerance, resistance to most of the oil and low fat solvent resistance, wear resistance, high and low temperature.

l  Performance requirements of tire curing label

l  With excellent thermal transfer performance and long-term readability, as well as visibility and traceability throughout the supply chain, sulphur label has been used by major tire manufacturers throughout the world.Modern tire manufacturers generally have the following performance requirements for tire curing label.

l  Can withstand the heat and pressure of the tire when treated with high temperature and vulcanization.

l  Provide durability and wear resistance.

l  When the adhesive system is integrated, the solid permanent adhesive can be formed at high temperature and curing.

l  It can achieve 100% accurate first reading scan in the high-speed transmission pipeline.

l  Each bar code is a sequence code of different data.

Specification: customer customization

Applicable industries: chemical industry, petroleum industry

Label material: high temperature resistant sun protection adhesive label

TYPICAL PERFORMANCE DATA

(N/25mm)

loop Tack (st,st)-FTM 9: 14.0 or Tear

20 min 90° Peel (st,st)-FTM 2:   7.0 or Tear

24 hour 90° Peel (st,st)-FTM 2:  8.0 or Tear

Minimum Application Temperature: +7°C

Service Temperature Range:  -50°C~+200°C

loop Tack (st,st)-FTM 9: 14.0 or Tear

20 min 90 Peel (st,st)-FTM 2:   7.0 or Tear

24 hour 90 Peel (st,st)-FTM 2:  8.0 or Tear

Storage temperature: 23 + 2 ℃. Under the condition of 50 + / - 5% relative humidity, can be stored for a year.

Adhesive: AP104 adhesive, permanent adhesive,High temperature adhesive

Printing technology: the size and printing content can be customized by customers, timely delivery!

Service hotline: 020-82218945

Scope of application: petrochemical sticker, tire sticker, oil label, lube label