Details:

l  Cleaning label, daily cleaning label.Must be achieved. Label waterproof and moisture-proof, not easy to fall off.

l  The daily adhesive label printing mostly USES the relief printing, mostly is the flat type or the circular platen printing method, the paper and the film substrate must satisfy the relief printing certain performance, simultaneously must satisfy the label printing special request.Label printing is mostly block and line printing, ink requirements.This requires a large amount of ink transfer, non-drying adhesive printing surface smooth, substrate density, printing ink after the conjunctiva, easy to appear dirty phenomenon, in addition to the reasonable use of light fast dry ink, but also pay attention to control the temperature of the printing environment and printing speed.

l  The process of gilding is widely used in the non-drying label printing, using fast drying ink, which can be directly bronzed on the surface after printing, using photosensitive ink, printing ink layer before gilding fully solidified, will not affect the quality of gilding.Printing high-end label products are often coated after printing, with transparent plastic film through hot pressing to the surface of the sticker, to protect and increase the gloss.

l  The printing method of adhesive film is basically the same as that of ordinary plastic film, but there are not many kinds of film suitable for letterpress printing, mainly polyester gold and silver film, transparent film and polyethylene film.

l  There are three kinds of technology scheme for daily label film letterpress printing: single color block printing, printing with gilding and printing with film.Due to the smooth surface of the film, which is a non-absorbent material, the drying speed is relatively slow. In printing, ink quantity should be controlled, printing speed should be reduced appropriately, and printing environment should be controlled reasonably.For non-polar film substrate, xinli label should be corona treatment before printing to improve its surface polarity to meet the basic requirements of ink adhesion.

Specification: customer customization

Applicable industry: washing and protecting products

Label material: PE, PP, PET film

TYPICAL PERFORMANCE DATA

(N/25mm)

loop Tack (st,st)-FTM 9: 14.0 or Tear

20 min 90° Peel (st,st)-FTM 2:   7.0 or Tear

24 hour 90° Peel (st,st)-FTM 2:  8.0 or Tear

Minimum Application Temperature: +7°C

Service Temperature Range:  -50°C~+90°C

loop Tack (st,st)-FTM 9: 14.0 or Tear

20 min 90 Peel (st,st)-FTM 2:   7.0 or Tear

24 hour 90 Peel (st,st)-FTM 2:  8.0 or Tear

Storage temperature: 23 + 2 ℃. Under the condition of 50 + / - 5% relative humidity, can be stored for a year.

Adhesive: AP104 adhesive, permanent adhesive

Supplier: Averydennison

Certification: ISO/ ROHS

Technology: the size and printing content can be customized by customers, timely delivery!

Service hotline: 008620-82218945

Application: daily chemical label, laundry label, cleaning label, personal care label